Skip to main content

PneumaticPlus Blog

Pneumatic Insights
Compressed air filter regulator assembly with pressure gauge and blue air lines mounted on industrial processing equipment.

What Air Filter Does Your Compressed Air System Need?

PneumaticPlus

PneumaticPlus 5 minute read

Pneumatic Insights

A CNC machine operator in blue workwear using a control panel beside a large industrial machining center.

Air Dryers That Excel in CNC Machine Environments

PneumaticPlus

PneumaticPlus 6 minute read

Pneumatic Insights

Collage of brass DOT metal push-to-connect PT-series fittings in various configurations — straight connectors, elbows, tees, unions, and bulkhead unions

DOT Metal Push-to-Connect Fittings: The Complete Guide

PneumaticPlus

PneumaticPlus 9 minute read

Pneumatic Insights

Comparison of a correctly seated push-to-connect tube reaching full depth past the seal, versus a tube stopped short at the gripping ring with a gap where air leaks

Why DOT Push-to-Connect Fittings Leak (and How to Fix It)

PneumaticPlus

PneumaticPlus 4 minute read

Pneumatic Insights

Cross-section of a DOT push-to-connect fitting showing the nylon tube seated past the gripping ring and seal against the internal tube support

How to Install DOT Push-to-Connect Fittings Correctly

PneumaticPlus

PneumaticPlus 5 minute read

Pneumatic Insights

Collage of DOT push-to-connect PT-series fittings — straight connectors, elbows, tees, unions, bulkhead unions, and press-in cartridge

DOT Push-to-Connect Configurations Explained: The PT10–PT29 Series

PneumaticPlus

PneumaticPlus 4 minute read

Pneumatic Insights

DOT-Rated vs. Standard Pneumatic Push-to-Connect Fittings

PneumaticPlus

PneumaticPlus 3 minute read

Pneumatic Insights

Brass metal DOT push-to-connect fitting shown side by side with a composite push-to-connect fitting

Metal vs. Composite DOT Push-to-Connect Fittings: Why Choose Brass

PneumaticPlus

PneumaticPlus 4 minute read

Pneumatic Insights

Push-to-connect fitting holding a tube with a gripping ring and seal, beside a compression fitting where a threaded nut compresses a sleeve onto the tube

DOT Push-to-Connect vs. Compression Fittings: Which to Use

PneumaticPlus

PneumaticPlus 4 minute read

Pneumatic Insights

Diagram showing how DOT air-brake standards relate: 49 CFR 393.45 requires FMVSS No. 106, which incorporates SAE J844 tubing, SAE J2494-3 for push-to-connect, and SAE J1131 for compression

DOT Fitting Compliance Explained: FMVSS No. 106, SAE J844, and the Standards Behind Every Air-Brake Connection

PneumaticPlus

PneumaticPlus 7 minute read

Pneumatic Insights

Next ⇢

« Back to Blog

!